Low Pressures Handling Butt-Clamped Butterfly Valve

• Customization: Available
• Media: Fresh Water, Lubricanting Oil, Fuel Oil,
• Temperature: Low Temperature
• Model NO.: DY01011564
• Type: Valve
• Material: Cast Iron
• Connection Form: Flange
• Pressure: Low Pressure
• Actuator: Manual
• Seal Surface: Wedge Gate Valve
• Thread Position of Valve Rod: Inside Gate Valve
• Usage: Safety
• Standard: CB/T GB/T JIS DIN API ANSI BS etc
• Application: Industrial Usage
• Transport Package: Standard Packing
• Trademark: DEYUAN MARINE
• Origin: China
• Production Capacity: 2000/Month
• Package Size: 40.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 10.000kg

Product Description

Product Description

 

Low Pressures Handling Butt-clamped Butterfly Valve

A Butterfly valve is a quarter-turn rotational motion valve, that is used to stop, regulate, and start flow.

Butterfly valves are easy and fast to open. A 90° rotation of the handle provides a complete closure or opening of the valve. Large Butterfly valves are usually equipped with a so-called gearbox, where the handwheel by gears is connected to the stem. This simplifies the operation of the valve, but at the expense of speed.

Types of Butterfly valves

Butterfly valves has a short circular body, a round disc, metal-to-metal or soft seats, top and bottom shaft bearings, and a stuffing box. The construction of a Butterfly valve body varies. A commonly used design is the wafer type that fits between two flanges. Another type, the lug wafer design, is held in place between two flanges by bolts that join the two flanges and pass through holes in the valve's outer casing. Butterfly valves are even available with flanged, threaded and butt welding ends, but they are not often applied.

Butterfly valves possess many advantages over gate, globe, plug, and ball valves, especially for large valve applications. Savings in weight, space, and cost are the most obvious advantages. The maintenance costs are usually low because there are a minimal number of moving parts and there are no pockets to trap fluids.

Butterfly valves are specially well-suited for the handling of large flows of liquids or gases atrelatively low pressures and for the handling of slurries or liquids with large amounts ofsuspended solids.

Butterfly valves are built on the principle of a pipe damper. The flow control element is a disk of approximately the same diameter as the inside diameter of the adjoining pipe, which rotates on either a vertical or horizontal axis. When the disk lies parallel to the piping run, the valve is fully opened. When the disk approaches the perpendicular position, the valve is shut. Intermediate positions, for throttling purposes, can be secured in place by handle-locking devices.


Technical Parameters of Butterfly Valve: