• Marine 31-37kn Automatic Release Hook for Boat
  • Marine 31-37kn Automatic Release Hook for Boat

Marine 31-37kn Automatic Release Hook for Boat

Type: Inland and Coastal Boats
Marine Parts: Marine Hardware
Transport Package: Standard Export Packing
Specification: CCS, EC, BV, ABS, BV.
Trademark: DEYUAN MARINE
Origin: China
Customization:

360° Virtual Tour

Diamond Member Since 2013

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company

Basic Info.

Model NO.
DY31-37KN
Production Capacity
1000set/Month

Product Description

Marine 31-37KN automatic release hook for rescue boat&liferaft
Marine 31-37kn Automatic Release Hook for Boat
31-37 KN Quick Release Hook Overview:

1.Material:Stainless Steel.
2.Safe working load:31-37KN.
3.Certificate:EC,CCS.


Working instruction of 31-37 KN Quick Release Hook:

1.Move the hook to the hooking position when the fork handle is at unhooking position.
2.Move the fork handle down to the hook protector position by a flexible push rod then insert the protector into the protecting hole.
3.turn the torsion spring on the hook,put down the lifting steel cord or the ring.Keep the torsion spring in loose status to prevent the cord dropping then start lifting a heavy object.
4.To carry a unhooking operation,take the protector out of the protccting hole then use the flexible push rod move the fork handle upward to the unhooking position the heavy object can drop from the hook freely.
5.Repeat the above hooking and unhooking operation.The hook can work normally when using it.
 

Process for hook installation(refer to general drawing):

*Install the hook with a hook ring(attached tool: special wrench)
*Unscrew and remove the set screw on the round nut
* Unscrew and remove the round nut
*Remove the pin
*Take out the bus
*Put the bush into the hook ring then reinstall the pinthen fasten the round screw and the set screw to finish a whole assembly process. 


Repaire and maintenance of 31-37 KN Quick Release Hook:

Keeping the check and maintenance note:
1.If find any part that is worn and torn or deformed,it should be replaced.
2.The active position should be lubricated regularly with grease.
3.The hook surface should be cleaned with sewing machine oil per two months and smear with clean sewing machine oil after cleaning to prolong the serice life.


Marine 31-37kn Automatic Release Hook for Boat
Technical Datas of 31-37KN automatic release hook for rescue boat&liferaft
Marine 31-37kn Automatic Release Hook for Boat
Marine 31-37kn Automatic Release Hook for Boat
Marine 31-37kn Automatic Release Hook for Boat
Marine 31-37kn Automatic Release Hook for Boat

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now